Assembled PIC-P18 prototype board for 18-pin PIC controllers

Brand: Bravekit
Product Code: PIC-P18
Availability: In Stock

5 or more $15.00
Qty: - +
   - OR -   

With this board you can develop and prototype with any of Microchip's 18 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User button and status LED. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters. PIC-P18 supports both 3.3V low power and normal 5V operation.

PIC microcontroller can be added as option


  • ICSP/ICD connector for programming/debugging with ICD2, EXTRA-PIC, PIC JDM, PICkit2
  • RS232 Tx, Rx interface with MAX232 IC on socket
  • DIL18 microcontroller socket
  • Quartz crystall 20Mhz
  • LED to RB3 through jumper
  • user Button on RB2 port
  • Reset button
  • Power plug-in jack
  • selectable +3.3V / +5V power supply voltage regulator
  • Grid 100 mils (2.54mm)
  • GND bus
  • Vcc bus
  • Four mounting holes 3.1 mm (0,13")
  • FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions 100x80 mm (3,9x3,15")





  • Blink LED for PIC16F628 demo code (C source and HEX)
  • Button read for PIC16F628 demo code (C source and HEX)
  • RS232 read/write for PIC16F628 demo code (C source and HEX)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: