Assembled PIC-P40 prototype board for 40-pin PIC controllers

Brand: Bravekit
Product Code: PIC-P40
Availability: In Stock

10 or more $15.00
Qty: - +
   - OR -   

With this board you can develop and prototype with any of Microchip's 40pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User button and status LED. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters. PIC-P40 supports both 3.3V low power and normal 5V operation.

PIC microcontroller can be added as option


  • ICSP/ICD connector for programming with any PIC programmer or debugging (EXTRA-PIC, JDM PIC, ICD2, PICkit2 or other),
  • RS232 Tx, Rx interface with MAX232 IC
  • DIL-40 microcontroller socket
  • Quartz crystall 20Mhz
  • LED to RA0 through jumper
  • user Button on RA5 port
  • Reset button
  • Power plug-in jack
  • selectable +3.3V / +5V power supply voltage regulator
  • Extension slot on every uC pin
  • Gird 100 mils (2,54mm)
  • GND bus
  • Vcc bus
  • Four mounting holes 3 mm (0,13")
  • FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print .
  • Dimensions 100x80 mm (3,9x3,15")





Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: