LPC1343-HB development DIP module, USB header board

Brand: Bravekit
Product Code: LPC1343-HB
Availability: In Stock
Price:
$11.00

Qty: - +
   - OR -   

LPC1343-HB module designed for use in debugging and prototyping boards to create various prototypes of devices based on Cortex-M3 LPC1343 microcontroller, or for training to work with these microcontrollers, or as a ready-made solution in various embedded systems.
The module based on the LPC1343 microcontroller with Cortex-M3 core: operating frequency up to 72 MHz, 32kB FLASH, 8kB SRAM, UART RS-485, USB, SSP, I2C/Fast +, ADC. The great feature of this microcontroller’s family is the built-in USB bootloader, which lets you load any firmware to the microcontroller through the USB interface without an external programmer, which is especially important for beginners

Features

  • MCU LPC1343FBD48, Cortex-M3
  • DIP form-factor allows module to be used in prototype boards for extending functionality
  • Standard mini-USB connector
  • Built-on USB bootloader lets you load any firmware to the microcontroller through the USB interface without an external programmer
  • 3.3V/750mA on-board voltage regulator
  • Module can be powered from USB or from external power supply
  • Ability turn-off power from USB by SMD jumper JP1
  • RESET button
  • BOOT jumper for enabling USB bootloader
  • 12MHz quartz crystal oscillator
  • 4-pin connector for external SWD programmer (J-link, Ulink, CoLinkEx, etc.)
  • High quality PCB with solder mask and components marking
  • All pins of LPC1343 are connected to extension connectors
  • Size 56х19х19mm (2.2x0.75x0.75 inch)

Elements of LPC1343-HB module

 

Documentation

 

What included

  • LPC1343-HB module, assembled and tested

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: