STM32F103-DB 128k/512k board for ST CORTEX-M3 controllers

Brand: Bravekit
Product Code: STM32F103-DB
Availability: In Stock
Price:
$49.95

Available Options


* Installed STM32 MCU:

Qty: - +
   - OR -   

Development  board STM32F103-DB is a universal  tool to explore new ARM CORTEX-M3 microcontrollers from ST Microelectronics.
As a option  (not in standard set), character LCD or 2.8''color TFT LCD 262k color screen with 320x240 pixel touch screen can be added to  the board.

Board features:

  • MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
  • as option can be installed STM32F103RET6 ARM 32 bit CORTEX M3™ with 512K Bytes Program Flash, 64K Bytes RAM
  • Large set of jumpers for flexible setup and configuration of board
  • USB interface with programmable pull-resistor 1.5 KOhms on the line D +
  • standard JTAG SWD connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • CAN driver and connector
  • RS232 driver and connector
  • USB/UART converter based on FT232RL from FTDI, connected to USART1. Firmware can be loaded to microcontroller via this USB/UART port with ST Flash Loader Demonstrator  software.  Extension headers for all port pins of FT232RL.
  • UEXT connector which allow different modules with USART, I2C or  SPI to be connected
  • SD  connector with “write protect” and “card inserted” detection
  • backup battery connector
  • RESET button
  • power supply LED (red)
  • two status LED’s
  • on board voltage regulator 3.3V with up to 800mA current
  • Wide range of power supply inputs:
  • Connected to ADC  potentiometer
  • 8 MHz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  •  “Wakeup” button, “Tamper” button and two user buttons
  • 16K 25LC160A EEPROM with SPI interface
  • Ability to connect a standard character LCD with HD44780 controller (WH2002 type, etc.) with the choice of its supply voltage (3.3 V/5V) and adjustable contrast
  • Connector for color 2.8 "TFT LCD Display 320 * 240 pixels 262K color touch-screen module. The board provides a fully functional operation of the display via 8-bit bus, and the work of touch panel with control on the SPI.
  • extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), solder mask, silkscreen component print
  • Dimensions: 123 x 91mm (4.85 x 3.5")

 

Documentation:

 

Software:

 

What included:

  • One STM32F103-DB board
  • PLEASE NOTE!! 2.8" TFT LCD module not included. It is can be added as option

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: