Header board with ATMEL ARM7 AT91SAM7S: JTAG, USB

Brand: Bravekit
Product Code: ARM-AT91SAM7S-HB
Availability: In Stock
Price:
$25.00

Available Options


* installed AT91SAM7S MCU:

Qty: - +
   - OR -   

Header board for AT91SAM7S ARM7 TDMI-S microcontrollers - the universal board enabling easily and quickly to start to work with ATMEL ARM7 microcontrollers.

Features

  • MCU: AT91SAM7S128/256/512 16/32 bit ARM7TDMI™ with 128K/256K/512K Bytes Program Flash, 32K/64K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
  • Fully compatible with wide range of ARM JTAG programmers/debuggers/emulators
  • perfect solution for building custom USB peripherials
  • standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • RESET button
  • User button connected to PA19
  • VREF jumper for select ADC reference voltage
  • BDS jumper
  • TEST jumper, for SAM-BA downloading (bootloader via USB port - can be programmed without external programmer)
  • ERASE jumper for restoring of MCU to initial state
  • on board voltage regulator 3.3V with up to 800mA current
  • single power supply: through USB or from extension header pin
  • power supply LED
  • user LED connected to PA18
  • power supply filtering capacitor
  • 18.432 Mhz crystal
  • extension headers for all uC ports + ADC ports, RESET and power supply
  • High quality PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print on top side
  • Dimensions: 60 x 34.5 mm

 

Documentation

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: