AT90USB162-DB development board with AT90USB162 ATMEL AVR MCU

Brand: Bravekit
Product Code: AT90USB162-DB
Availability: In Stock

Qty: - +
   - OR -   

AVR AT90USB162 microcontroller – this is one of the easiest and cheapest ways to create a USB device. ATMEL provides free source for HID (mouse, keyboard) and CDC (USB to RS232) devices.
Development board AT90USB162-DB allows you to use almost all the features of the microcontroller AT90USB162. The board has a USB connector, Joystick, RS232, SD Card interface connector, the audio output, two ISP connector (10-pin and 6-pin), and an expansion connectors for all ports of the microcontroller.
In addition, the board can be programmed via USB without an external programmer (with a USB bootloader, is loaded into the device, and FLIP software by ATMEL). To enter the bootloader mode you shoud press and hold HWB button, then press and release RESET button


  • AT90USB162 microcontroller with 16KB Flash, 512B RAM, 512B EEPROM
  • ICSP connectors 5x2 and 3x2 for external programmer (but you can program the controller and without an external programmer - only with USB port)
  • Debug Wire could be performed by 3 wires connected to ISP
  • USB USB 2.0 connector
  • RS232 driver IC and connector
  • SD card connector with "Card present" and "Write protect" functions
  • Audioamplifier amd standard 3.5mm audio connecor (the board able to generate sound)
  • All ports of AT90USB162 controller are connected to extension connector
  • User LED (green)
  • 4-axys joystick with "Select" button
  • User button HWB (can be used for enter AT90USB162 controller into USB bootloader mode)
  • RESET button
  • takes power from USB no need for external adapter
  • external power supply and voltage regulator if USB can't provide enough power
  • Power suplpy LED (red)
  • Quartz crystall oscilator circuit 8Mhz
  • four mounting holes 3 mm
  • Small prototype are with places for installing SMD components (SOIC, SOT23, SMD1206)
  • FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print on top side
  • dimensions 80x80 mm




Links and examples:

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: