Assembled AVR-P28 board for 28-pin ATMEL AVR microcontrollers

With this board you can develop and prototype with any 28-pin ATMEL AVR microcontrollers: Atmega8,  ATmega48, ATmega88, ATmega168... and other

As option, can be added AVR microcontroller

Features

• ICSP 5x2 pin connector for in-circuit programming with AVR ISP. Compatible with STK200, AVR ISP v3.2, AVRISP and other programmers
• RS232 Tx, Rx interface with MAX232 IC
• 8 MHz crystal on socket (user can replace with any value)
• reset IC (MC34064 or similar)
• status LED connected to PC5 via removable jumper
• DIL28 microcontroller socket
• Power plug-in jack
• +5V power supply voltage based on 7805
• extension pin headers for each uC pin
• four mounting holes 3.3 mm (0.13")
• GND bus
• Vcc bus
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• dimensions 100x80 mm (3.9x3.15")

Documentation

• AVR-P28 schem

Software

• AVR-P28 + ATmega8 Blinkng LED (C source and HEX)
• AVR-P28 + ATmega8 UART demo (C source and HEX)
• AVR-P28 + ATmega8 Button demo (C source and HEX)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: