Assembled AVR-P40-8535 board for 40-pin ATMEL AVR controllers

With this board you can develop and prototype with 40-pin ATMEL AVR microcontrollers: Atmega8535, Atmega16, ATmega32 and other...

AVR microcontroller can be added as option

Features

• ICSP 5x2 pin connector for in-circuit programming with AVR ISP. Compatible with STK200, AVR ISP v3.2, AVRISP and other programmers
• Voltage +5V, (based on 7805) and filtering capacitors
• Quartz crystall oscilator circuit 
• reset IC MC34064 or other
• status LED
• Power plug-in jack
• DIL40 microcontroller socket
• RS232 DB9 female connector
• RS232 MAX232 interface circuit with Tx, Rx, CTS, DTR/RTS signals
• Extension slot on every uC pin
• Grid 2.54mm
• GND bus
• Vcc bus
• FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
• four mounting holes 3.3 mm (0.13")
• dimensions 100x80 mm (3.9x3.15")

Documentation

• AVR-P40-8535 schem

Software

• AVR-P40-8535 + ATmega16 blink LED (C source and HEX)
• AVR-P40-8535 + ATmega16 UART demo code (C source and HEX)
• AVR-P40-8535 + ATMega16 Button demo code (C source and HEX)
• AVR-P40-8535 + ATMega16 UART menu demo code (C source and HEX)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: