Electrically isolated ATMEL AVR ISP v3.2 programmer with USB/UART

Brand: Bravekit
Product Code: AVR-ISP-v32
Availability: 4

Price: $37.00

Qty:

- OR -

Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0) Related Products (12)

AVR ISP v3.2 it is professional in-system programmer for all 8-bit ATMEL AVR RISC microcontrollers. Programmer connects to the PC through standard USB port. A power undertakes directly from USB, that excludes necessity for the external power supply. Also programmer provides electrically isolated power supply +5V 200mA output for your devices. Windows detect the device as a virtual COM-port. In additional programmer have USB to UART TTL converter function. Certainly this feature will be demanded to developers at debugging the programs using UART the interface.
Fully galvanically isolation - this is warranty, that your personal computer will not be damaged under any conditions is not dependent that will occur in target board.
AVR ISP v3.2 also generates frequency 1,8MHz for what clocking or the external controller (if you have a necessity for external clocking).
AVR ISP v3.2 it is supported by AVR Studio, and also other known compilers (CodevisionAVR, Image Craft and others).
AVR ISP v3.2 can be used with "AVR DIP Programmer board" (see other products) for programming controllers in DIP case

Features

Very high programming speed
High quality PCB with mask and inscriptions.
Two ISP connectors: 10-pin connector with standard pinout, and 7-pin connector (see photo)
AVR Studio Compatible. Tested with all AVR Studio version’s, including latest
1) Programming interface to flash, eeprom, fuses and lockbits.
2) Output clock 1.8 MHz for your needs
3) USB to UART TTL converter (galvanically isolated from PC)
4) galvanically isolated +5V 200mA power supply output.
Jumper to power your device via ISP cable.
AVR Studio firmware upgradeable
red LED for status “POWER ON”
yellow LED for programming status “PROG”
green LED for status “READY”
Compatible with Windows 98 / 2000 / XP/Vista/Vista64/Windows 7
Size 70x45 mm.
Ready to installing in any case (4 holes d=3mm).

Connector pinouts

Standard 10-pin connector pinout(see photo)
1. MOSI
2. power output +5V 200mA (after installing power supply jumper on programmer board)
3. Clock source output 1.8Mhz for programming AVR controllers with external clock configuration (selected by fuse bits during programming)
4. GND
5. RESET
6. GND
7. SCK
8. GND
9. MISO
10. GND

7-pin connector pinout
1.power output +5V 200mA (after installing power supply jumper on programmer board)
2. RESET
3. MOSI
4. MISO
5. SCK
6. GND
7. Clock source output 1.8Mhz for programming AVR controllers with external clock configuration (selected by fuse bits during programming)

List of supported Devices

The following devices are supported by AVR USP v3.2:

ATtiny11
ATtiny12
ATtiny13
ATtiny15
ATtiny22
ATtiny2313
ATtiny24
ATtiny25
ATtiny26
ATtiny261
ATtiny28
ATtiny43U
ATtiny44
ATtiny45
ATtiny461
ATtiny48
ATtiny84
ATtiny85
ATtiny861
ATtiny88
ATtiny167

AT90S1200
AT90S2313
AT90S2323
AT90S2333
AT90S2343
AT90S4414
AT90S4433
AT90S4434
AT90S8515
AT90S8535

ATmega8
ATmega16
ATmega32
ATmega32HVB
ATmega48
ATmega48P
ATmega64
ATmega88
ATmega88P
ATmega103
ATmega128
ATmega1280
ATmega1281
ATmega1284P
ATmega16HVA
ATmega161
ATmega162
ATmega163
ATmega164P
ATmega165
ATmega165P
ATmega168
ATmega168P
ATmega169
ATmega169P
ATmega323
ATmega324P
ATmega325
ATmega325P
ATmega328P
ATmega329
ATmega329P
ATmega32C1
ATmega32M1
ATmega32U4
ATmega406
ATmega640
ATmega644
ATmega644P
ATmega645
ATmega649
ATmega2560
ATmega2561
ATmega3250
ATmega3250P
ATmega3290
ATmega3290P
ATmega6450
ATmega6490
ATmega8515
ATmega8535
AT90CAN32
AT90CAN64
AT90CAN128
AT90PWM2
AT90PWM2B
AT90PWM216
AT90PWM316
AT90PWM3
AT90PWM3B
AT90USB82
AT90USB162
AT90USB646
AT90USB647
AT90USB1286
AT90USB1287