1 layer LQFP SOIC TQFP SSOP prototype board

This prototype board can be useful by developers, who need fast getting started with any IC in LQFP, TQFP, SSOP or SOIC case.

Features:

• High quality 1 layer PCB with red mask
• One LQFP-100 PCB placement. Can be used for mounting any LQFP package with 100 pins or smaller (LQFP 32, LQFP 64 and other) – for example AT91SAM7S64, LPC2134 and other. Pin-to-pin spacing is 0,5mm (19,7 mil)
• One TQFP-44 PCB placement. Can be used for mounting any TQFP-44 or TQFP-32 package with 44 or 32 pins (For example ATmega16, PIC16F877, FT232BM and other). Pin-to-pin spacing is 0,8mm (31,5 mil)
• One SOIC PCB placement – each side has 36 pins. Can be used for mounting 2-3 IC is SO-14, SO-16 or any SOIC case (for example MAX232 or other)
• Two SSOP-28 PCB placement. Can be used for mounting any SSOP IC with 28 pins or smaller. For example FT232RL, FT245RL or other
• Two SOIC PCB placement – each side has 26 pins. Can be used for mounting as SOIC-14, SOIC-16 IC’s, as and SOIC-20 IC’S (For example ATtiny2313, SN74HC244 or other IC)
• all pins of PCB placement has connectors for soldering any wire or connector
• Large prototype area for extending scheme
• 4 mounting holes
• size 150x110mm (5.9x4.33 inch)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: